|
|
A high-speed Telephone Modem option for ScadaFlex Plus™ Controllers that provides
an additional serial link for remote data and touchtone access and control as well
as alarm dialing, numeric and alphanumeric paging, and e-mail.
| Features | Specifications | DataSheet | Software |
Features |
Back to Top |
|
|
The ScadaFlex Plus RTU/Controller is available with and internal telephone modem. This option allows for both dail-in and dail-out features for remote access and alarm notification. The modem supports data rates of up to 56K baud, the highest speed available today for the public telephone system.
A telephone mode in the ScadaFlex Plus Controller facilitates remote access from wither a desktop ot laptop PC from anywhere in the world using software already built into Windows. examine or change setpoints, download data logs or upload program and configuration files without traveling to the site. All remote access includes password and username security protection.
ScadaFlex Plus Controllers also support worldwide remote access using just a touchtone telephone. Examine register and I/O values, or change setpoints and outputs using voice-prompted telephone keypad commands.
With the internal telephone modem option, a ScadaFlex Plus Controller can automatically dail-out to annunciate an alarm condition by voice, numeric or alphnumeric pager and e-mail. Voice and text messages can include embedded register, point, time and data information. Configuration takes only a few seconds using ScadaBuilder Windows software. Telephone lists and text messages are stored as digital data files in the Controller for easy updating, aback-up and "cloning".
The internal medem option is designed foroperation in tough environments that would destroy conventional PC type modems. they feature tough transient and lightning protection, and a very wide operating temperature range. The Controller and modem option are backed by an industry-leading 3-year warranty.
The ScadaFlex Plus is part of a family of Intelligent RTU's and Controllers which includes the Etherlogic and ICL-4300. To find out more about features supported by the ScadaFlex Plus and other Intelligent RTU's:
ScadaFlex Plus Telephone Modem and Voice Option Specifications |
Back to Top |
| Telephone Line Interface | |
| Maximum Data Rate | 56kbps (V.90) |
| Compatibility | K56flex, V.90, V.34, V.32bis, V.32, V.23, V.22bis, V.22, V.21, Bell 212 and Bell 103 |
| Data Compression | V.42bis and MNP5 |
| Error Correction | V.42, MNP 2-4, and 10 |
| Line Connection | RJ11 Jack |
| Serial Interface | |
| Maximum Serial Data Rate | 115Kbps |
| Command Set | AT&S register commands, including Voice Record/Playback |
| Status LEDs | TXD, RXD, CD, RI |
| Voice Interface | |
| Type | digitally Synthesized Voice |
| Audio Dynamic Range | 8 bits (1 part in 256) |
| Memory Utilization | 8K bytes per Second of audio |
| typical audio storage capacity | over 6 minutes (3MB Flash) (or more with phrase reduction) |
| Alarm Processing | |
| Alarm Notification Interfaces | Alarm Dial with Voice annunciation Numeric and Alphanumeric pagers (TAP protocol), and E-mail (POP) |
| Alarm Acknowledgment interfaces | Touchtone and/or Discrete Input |
| Alarm Call Lists | over 1,000 (limited by Flash memory) |
| Telephone umbers per call list | over 1,000 (limited by Flash memory) |
| Alarm Redial (telephone busy) | up to 65,535 seconds up to 65,535 times |
| General Specifications | |
| Power Requirements | supplied internally by Controller |
| Power Consumption | 750mW maximum |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Humidity | 10 to 95% RH (non-condensing) |
Download Datasheet: |
Back to Top |
 Get it now (62K)* |
 Email it to me.
|
* PDF format -- requires Adobe Acrobat Reader 4.0 or newer.
* Click below to get it for free.
* 