|
|
A unique "open architecture" controller that combines IEC 61131-3 programmable
control, process monitoring and data logging, a built-in mini operator interface,
high-speed serial and wireless communications, and voice, pager and e-mail
alarm annunciation.
ScadaFlex Plus™ models can also be configured with a telephone modem and voice option.
| Features | Specifications | DataSheet | Options | Software | Tech. Manual |
Features |
Back to Top |
|
|
The ScadaFlex Plus - Operator Interface RTU/Controller is an "open architecture" programmable controller with built-in RS-485 networking, wireless, hardwired and modem communications, and a large standard memory capacity for data logging and "over-the-link" program updates.
ScadaFlex Plus had a built-in "mini" Operator Interface to examine or force the value of any analog or discrete I/O point and configure operating parameters, frequently eliminating the need for a laptop computer or more expensive display in the field.
As an open architecture controller, ScadaFlex Plus comes with a full
licensed ISaGRAF IEC-61131 package along with support for C and C++,
providing a choice of eight different programming languages to minimize
retraining and ramp-up time. Mix and match any of these languages to get
the job done quickly and reliably.
In addition to powerful programming tools, ScadaFlex Plus is supported
by ICLs ScadaBuilder software. ScadaBuilder eliminates hours of
programming time with point-and-click configuration of serial and
network communications, data and alarm logging, alarm annunciation
(including pager, e-mail, and voice support), and a simple but powerful
MMI interface over hardwired, radio or telephone connections.
The open architecture design of ScadaFlex Plus extends to its communications capabilities. By supporting industry standard protocols like Modbus and Modbus TCP/IP as well as the standard suite of Ethernet and Internet protocols. ScadaFlex Plus is easily integrated into existing factory Local Area Networks and SCADA systems, including all of the top HMI software packages, without special drivers.
The ScadaFlex Plus is part of a family of Intelligent RTU's and Controllers which includes the Etherlogic and ICL-4300. To find out more about features supported by the ScadaFlex Plus and other Intelligent RTU's:
ScadaFlex Plus - Operator Interface Specifications |
Back to Top |
| Analog Inputs | |
| Quantity | 8 |
| Input Type | 0 or 4 to 20mA, 0 or 1 to 5V |
| Resolution | 16 bits (1 part in 65,535) |
| Input Overload Tolerance | Input current limited to 50mA Input Voltage limiting a 6Vdc |
| Overload / Transient Protection | Transorb/Self-resetting Polyfuse |
| Conversion Rate | Approx. 2 samples/sec per point |
| Noise Rejection | -120dB |
| Discrete Inputs | |
| Quantity | 22 |
| Input type | Optically isolated with shared isolated common, AC/DC in |
| ON Input Level | 9Vac/Vdc minimum |
| OFF Input Level | 6Vac/Vdc maximum |
| Maximum input level | 50 Vac/Vdc |
| Discrete Outputs | |
| Quantity | 10 |
| Output Type | Power FET, Sinking to Common |
| Output Voltage, nominal/max. | 12/24 Vdc 0 to 28 Vdc |
| Output Switch Current Rating | .50A @ 20°C, .25A @ 80°C |
| Overload Protection / Fault Current | Self-Resetting Polyfuse, 750mA |
| Analog Outputs | |
| Quantity | 2 (6 optional) |
| Output Type | 0 or 4 to 20mA |
| Resolution | 12 bits (1 part in 4096) |
| Processor: Control & Communications | |
| CPU | Intel 386EX, 25MHz |
| Flash Memory | 4MB |
| RAM Memory | 1MB |
| Real Time Clock | Dallas DS1689S (PC compatible) |
| Processor: Input / Output (I/O) | |
| CPU | Atmel ATMEGA323, 7.37MHz |
| Flash Program Memory | 32KB |
| RAM Memory | 2KB |
| General Specifications | |
| Dimensions | 4.60 W x 6.15 L x 2.85 D inches (117mm W x 156mm L x 72mmD) |
| Power | 10 to 28Vdc, 3 Watts typical, 6 Watts Max (int. radio transmit) |
| Temperature | -40°C to 75°C (-40°F to 167°F) |
| Humidity | 5 to 85% RH (non-condensing) |
| Communications | |
| Serial Ports | 4 (+ 1 internal modem / radio) |
| Serial Port Interfaces | 1st, 2nd port: RS-232, 9 pin D Male 3rd, 4th port: RS-232/RS-485, Removable Terminal |
| Ethernet | 10Base-T (10 Mb/sec), RJ-45 modular connector |
| Communications Options | |
| Internal Spread Spectrum Radios | 900 MHz, 1W up to 115Kbaud 2.4Ghz, 0.5W, up to 115Kbaud |
| Telephone Modem w/Voice | 56Kbaud, PC compatible |
Download Datasheet: |
Back to Top |
 Get it now (74K)* |
Download Technical Reference Manual |
* PDF format -- requires Adobe Acrobat Reader 4.0 or newer.
* Click below to get it for free.
* 