A unique "open architecture" controller that combines IEC 61131-3 programmable control,
process monitoring and data logging, built-in Ethernet, Internet and high-speed
serial and wireless communications, and voice, pager, and e-mail alarm annunciation.
| Features | Certification | Specifications | DataSheet | Software |
Features |
Back to Top |
|
|
The EtherLogic LC RTU/Controller is an "open architecture" programmable controller with built-in Ethernet and serial communications. It offers 32-bit processing power, network communications and high level software tools that minimize programming time. EtherLogic LC has "large controller" hardware features and software tools at a cost competitive with ordinary relay replacement "shoebox" controllers.
With 32-bit processing power and high level software tools that minimize programming time, EtherLogic LC™ bridges the gap between traditional PLCs, RTUs and the new generation of Ethernet and Web connected instruments.
The open architecture design of EtherLogic LC extends to its communications capabilities as well. EtherLogic LC supports industry standard serial communications protocols like Modbus as well as the standard Ethernet and Internet protocols, allowing it to be easily integrated into existing factory Local Area Networks. By not relying on proprietary protocols, EtherLogic LC is supported by the top HMI software packages like InTouch (Wonderware), FIX (Intellution) and Lookout (National Instruments) with "off-the-shelf" drivers.
The EtherLogic LC is part of a family of Intelligent RTU's and Controllers which includes the ScadaFlex Plus and ICL-4300. To find out more about features supported by the EtherLogic LC and other Intelligent RTU's:
EtherLogic LC Specifications |
Back to Top |
| Universal (Analog/Discrete) Inputs | |
| Quantity | 4 |
| Input Types | Analog In: 0 to 5Vdc, 0(4) to 20mA, 10K pot, 10K thermistor
(Type I & II) Discrete In: Dry Contact Closure to Common |
| Discrete In Wetting Current | 0.5mA maximum (10K resistor to +5Vdc) |
| Analog Resolution | 10 bits (1 part in 1024) |
| Analog Non-linearity | 0.5 LSB (0.05%) |
| Analog Temperature Coefficient | 5Vdc: 100ppm (0.1 LSB)/°C, 20mA/Thermistor: 125ppm (0.125 LSB)/°C |
| Discrete Inputs | |
| Quantity | 10 |
| Input type | Optically isolated with shared isolated common, AC/DC in |
| ON Input Level | 9Vac/Vdc minimum |
| OFF Input Level | 6Vac/Vdc maximum |
| Maximum input level | 50 Vac/Vdc |
| Discrete Outputs | |
| Quantity | 4 |
| Output Type | Relay, Form A (normally open) contacts |
| Output Rating | 250Vac/100Vdc max. 10A @ 125 Vac, 5A @ 30 Vdc |
| Analog Outputs | |
| Quantity | 2 |
| Output Type | 0 or 4 to 20mA |
| Resolution | AO1 & AO2: 10 bits (1 part in 1024) |
| Control & Communications Processor | |
| CPU | Intel 386EX, 25MHz |
| Flash Memory | 4MB |
| RAM Memory | 1MB |
| Real Time Clock | Dallas DS1689S (PC compatible) |
| Processor: Input / Output (I/O) | |
| CPU | Atmel ATMEGA16, 6.45MHz |
| Flash Program Memory | 16KB |
| RAM Memory | 1KB |
| Output Switch Current Rating | .50A @ 20°C, .25A @ 80°C | General Specifications |
| Dimensions | 7.0.W x 6.0.L x 2.5. D (178mm W x 152mm L x 64mmD) |
| Power | 24Vac or 10 - 28Vdc 3 VA typical, 6 VA maximum |
| Temperature | -40°C to 75°C (-40°F to 167°F) |
| Humidity | 5 to 85% RH (non-condensing) |
| Communications | |
| Serial Port Interfaces | 2 ports: RS-232, 9 pin D Male |
| Ethernet | 10Base-T (10 Mb/sec), RJ-45 modular connector |
| Communications Options | |
| Internal Spread Spectrum Radios | 900MHz, 1W, up to 115K baud
2.4GHz, 0.5W, up to 115K baud |
| Telephone Modem w/Voice | 56K baud, PC compatible |
EN 60079-15: Sept 2003 ATEX Group II Category 3 Gas Vapor or Mist Explosion protection.
Intertek’s ETL SEMKO division is the global leader in the testing, inspection, and certification of products for manufacturers and retailers around the world. Their strength is in helping clients reduce their time to market so that they may increase their revenue potential. For more than 100 years they have issued certification marks that prove a product’s compliance to specific market requirements. Intertek’s ETL SEMKO division holds the accreditations and affiliations manufacturers need for the global market entry of their products.They uphold the highest standards in both their testing methods and their business practices, and they maintain unquestioned integrity in the reports they provide to you. Please review the accreditations, affiliations and recognitions they have throughout the Americas, Europe and Asia-Pacific (HERE). - www.intertek-etlsemko.com Below you will also find Industrial Control Links listings. Almost all of ICL's products are ETL Certified* Industrial Control Links Inc. UL508 listing can be found HERE and HERE Industrial Control Links Inc. CSA-C22.2 listing can be found HERE and HERE |
||||
*Microbrick DO16 Relay (22-0022) and 4300 are not ETL certified |
Download Datasheet: |
Back to Top |
 Get
it now (109K)* |
 Email it to me.
|
| Get
it now (2.1M)* |
* PDF format -- requires Adobe Acrobat Reader 4.0 or newer.
* Click below to get it for free.
* 
