ICL-4300

Ordering Information

The ICL-4300 consists of a base module and any I/O cards and options you care to add. We also recommend the Starter Kit (43-START-KIT) for first-time purchasers. Depending on the number of I/O cards purchased, you may need filler panels.

Each base module includes:

Intel 33MHz 386EX CPU
4 MB Flash memory (program and data storage)
1 MB RAM (for program execution and data storage)
Real Time Clock/Calendar
Extended temperature range operation (-40°C to 80°C / -40°F to 176°F)

Base Modules

Model #	Description
43-BASE-2	ICL-4300 base module with 2 Serial Ports.
43-BASE-6	ICL-4300 base module with 6 Serial Ports.
43E-BASE-2	ICL-4300 base module with Ethernet and 2 Serial Ports.
43E-BASE-6	ICL-4300 base module with Ethernet and 6 Serial Ports.

Options

Model #	Description
43-DM2400	Internal dial-up telephone modem, 2400 baud, CCITT V.22bis.
43-DM14400	Internal dial-up telephone modem, 14,400 baud, CCITT V.32bis, MNP-10 error correction/data compression, supports cellular telephone communications.
43-DM33600	Internal dial-up telephone modem, 33,600 baud, supports CCITT V.34bis, MNP-10 error correction/data compression, supports cellular telephone and fax.
43-RM2400	Radio/Leased Line Modem, 2400 baud, supports radios with push-to-talk audio, leased, non-dialup telephone lines and non-powered copper wire pairs in point-to-point and multi-drop configurations.
RMX-2400	External 2400 Baud Radio/Leased Line Modem.
43-2 Port to 6 Port	Upgrade an existing ICL-4300 from 2 to 6 serial ports.
43-8/1 Mem Upgrade	8/1 Memory upgrade with purchase of new controller.
43-8/1 Mem Upgrd/PP	8/1 Memory upgrade for previously purchased controller.
43-Ethernet Upgrade	Upgrade an existing ICL-4300 to include Ethernet.
43-VA8	Natural Voice Option for alarm dialing and remote access via touchtone telephone. Supports up to 8 minutes of audio stored in non-volatile Flash memory (no batteries). Record & play back messages via any telephone; under program control or using 43-VA-KIT (below).
43-VA-KIT	Voice Accessory Kit (software, microphone, headset, Y-adapter, extension cable, and instruction sheet). One time purchase.
43-ARCNET	Arcnet (HSIO) Option. Used for expansion I/O or to create a high-speed local area network of ICL-4300's. Data rates up to 5Mbps are supported.

I/O Cards

Model	Analog Inputs	Analog Outputs	Digital Inputs	Digital Outputs
43-AI16-14	16	0	0	0
43-AO16-12I	0	16 (4-20mA)	0	0
43-AO16-12V	0	16 (0-5V)	0	0
43-DI16-24	0	0	16 (24V)	0
43-DI16-120	0	0	16 (120V)	0
43-DIO16-24	0	0	16	16
43-DO16-RLY	0	0	0	8 (relay)
43-DO8-SS24	0	0	0	8 (solid state relay, 24V)
43-DO8-SS120	0	0	0	8 (solid state relay, 120V)
43-MINICOMBO-24	4 (0-5V or 4-20mA)	2 (4-20mA)	4 (24V)	4 (relay)
43-MINICOMBO-120	4 (0-5V or 4-20mA)	2 (4-20mA)	4 (120V)	4 (relay)

Filler Panels

Filler panels are used to fill in the space where an I/O card would go, if no I/O card is present. Order them with your ICL-4300 if you are not getting the unit fully populated with 4 I/O cards.

Configurations:

no I/O cards -- use 2 full filler panels (43-FFP)
1 I/O card -- use 1 full filler panel (43-FFP) and 1 half filler panel (43-HFP)
2 I/O cards on the same side of the unit -- use 1 full filler panel (43-FFP)
2 I/O cards on opposite sides of the unit -- use 2 half filler panels (43-HFP)
3 I/O cards -- use 1 half filler panel (43-HFP)
4 I/O cards -- no filler panel needed

43-HFP	Half Filler Panel, 1 I/O module width.
43-FFP	Full Filler Panel, dual I/O module width.

Power Supply

40-4003	Power Supply. 40 Watts max, 17-24Vdc/4A unregulated, 14Vdc/3A regulated.
40-4003UPS	UPS Option for 40-4003 Power Supply, factory installed. Adds battery backup to regulated 14Vdc plus battery backed 30Vdc/0.5A for analog instrumentation loops.
40-4003-KIT	UPS Option for 40-4003 Power Supply, field installed. Adds battery backup to regulated 14Vdc plus battery backed 30Vdc/0.5A for analog instrumentation loops.
40-BAT-12/7	12Vdc/7Ah gell cell battery for 40-4003-KIT or 40-4003UPS UPS option.
40-BAT-12/12	12Vdc/12Ah gell cell battery for 40-4003-KIT or 40-4003UPS UPS option.
40-BATMNT-KIT	Gell Cell Battery Mounting Kit. Includes brackets and tie-down strap.

Other

43-START-KIT	Starter Kit. At least one Starter Kit is recommended when you purchase your first ICL-4300. Includes: cable & adapter to connect the ICL-4300 to a PC; ICL-4300 Utilities Diskette; ICL-4300 Utilities Reference Manual and ICL-4300 Hardware Reference Guide.
43-485T-KIT	RS-485 Network AC Terminator. Two required for network longer than 100 ft.